K151
K151 - High Pressure Chevron Seal
KASTAŞ NO | d ( f7) | D (H9) | B (-0/+0,2) | n |
---|---|---|---|---|
K151-014 | 14 | 24 | 7.25 | 6 |
K151-014/B | 14 | 24 | 9 | 6 |
K151-015 | 15 | 24 | 7.25 | 5 |
K151-015/B | 15 | 24 | 9 | 6 |
K151-016 | 16 | 26 | 7.25 | 6 |
K151-016/B | 16 | 26 | 9 | 6 |
K151-018 | 18 | 28 | 8 | 6 |
K151-018/B | 18 | 28 | 10 | 6 |
K151-020 | 20 | 30 | 8 | 6 |
K151-020/1 | 20 | 35 | 8.35 | 8 |
K151-020/2 | 20 | 32 | 8 | 7 |
K151-020/B | 20 | 30 | 10 | 6 |
K151-022 | 22 | 32 | 8.15 | 6 |
K151-022/1 | 22.2 | 32 | 8 | 6 |
K151-022/B | 22 | 32 | 10 | 6 |
K151-024 | 24 | 34 | 8 | 6 |
K151-024/B | 24 | 34 | 10 | 6 |
K151-025 | 25 | 35 | 7.85 | 6 |
K151-025/B | 25 | 35 | 10 | 6 |
K151-028 | 28 | 38 | 8 | 6 |
K151-028/B | 28 | 38 | 10 | 6 |
K151 is a three piece single acting chevron seal which consists ofone thermoplastic header ring , one special formulated reinforcedcotton fabric with nitrile rubber sealing element and one PTFEback-up ring. PRODUCT ADVANTAGES APPLICATION |
||||||||||||||||||
|
||||||||||||||||||
|
SURFRACE ROUGHNESS | Ra | Rmax |
Sliding Surface Ød | ≤0.3 μm | ≤4 μm |
Groove Base ØD | ≤1.5 μm | ≤10 μm |
Groove Flanks B | ≤0.3 μm | ≤4 μm |
Note: It is recommended to have 50% to 90% of the working surface material contact area value | ||
INSTALLATION |