K25

K25 - Pneumatic Piston Seal
   KASTAŞ NO D (H11) d (h9) B d1 s1 s
 K25-020 20 5,2 8 12,2 1 1,4
 K25-025 25 8 12 14,5 3 4
 K25-025/2 25,4 6,35 12,7 9,40 2,5 3,50
 K25-026 26 8 12 15,5 3 4
 K25-028 28.58 6.35 12.7 12.58 2.5 3.5
 K25-031 31.75 6.35 14.29 15.75 2.5 3.5
 K25-032 32 8 15 16 3 4
 K25-035 35 8 15 19 3 4
 K25-036 36 8 15 20 3 4
 K25-040 40 10 18 23 4 5
 K25-044 44,45 6,35 14,28 23,46 2,5 3,50
 K25-050 50 10 18 29 4 5
 K25-050/2 50 16 20.5 25 4 5
 K25-050/7 50.8 9.53 15.88 15.75 3 4
 K25-057 57.15 9.53 15.88 34.65 3 4
 K25-060 60 12 22 36,8 4 5
 K25-060/1 60.33 9.53 15.88 37.83 3 4
 K25-062 62 15 22 39 5 6
 K25-063 63 12 22 40,5 5 6
 K25-069 69.85 9.53 19.05 47.35 4 5.5
 K25-070 70 12 22 47 5 6
 K25-073 73.03 9.53 19.05 48.03 4 5.5
 K25-075 75 15 22 52 5 6
 K25-075/1 75 12 22.5 52 5 6
 K25-076 76.2 12.7 19.05 51.2 4 5
 K25-080 80 16 25 55 5 6,5
 K25-080/4 80 16 22.5 55.2 5 6.5
 K25-080/5 80 20 22,5 55,2 5 6,5
 K25-082 82.55 12.7 19.05 57.55 4 5
 K25-088 88.9 12.7 22.23 63.9 5 6
 K25-090 90 16 25 65 5 6,5
 K25-100 100 16 25 75 5 6,5
 K25-100/4 100 12 25 75 5 6.5
 K25-100/6 100 20 26 75 5 6.5
 K25-107 107.95 12.7 22.23 82.96 5 6
 K25-110 110 18 25 85 6 7,5
 K25-114 114.3 19.05 22.23 79.3 5 6
 K25-125 125 20 30 90 8 10
 K25-125/1 125 20 26 90 6 7.5
 K25-127 127 19.05 25.4 92 6 7.5
 K25-130 130 20 29 95,00 8 10,00
 K25-140 140 20 30 95 10 12
 K25-150 150 20 30 105 10 12
 K25-152 152.4 19.05 25.4 107.4 6 7.5
 K25-160 160 27 31 115 10 12
 K25-160/3 160 20 30 130 10 10.7
 K25-165 165.1 19.05 25.4 120.1 6 7.5
 K25-180 180 27 31 135 10 12
 K25-190 190 20 30 160,4 10 12
 K25-200 200 27 35 150 12 15
 K25-200/5 200 30 35 150,00 8 10,60
 K25-202 202.2 31.75 38.1 150.5 10 11
 K25-250 250 30 35 200 12 16,5
 K25-253 253 44.45 41.27 180 12 15
 K25-320 320 36 40 278,5 15 18,6
 K25-400 400 40 50 320 20 23

K25 is a double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Ready to fit complete piston
• Wide range of dimensions
• Low friction and smooth running due to sealing lip geometry
• Easily fastened to the piston rod without using additional sealing elements
• Long service life
• Economical sealing solution

APPLICATION
Iron and aluminum pneumatic cylinders.
MATERIAL   CODE
NBR 75 SHORE A NB7501
STEEL  ST37 FE9901
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105°C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.

   

SURFACE ROUGHNESS   Rmax
Sliding Surface  ØD ≤0.4 μm ≤3.2 μm

INSTALLATION
K25 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process. Special precautions has to be taken at the end of the stokes to avoid damaging of the sealing lips.

NOTES
For special applications that require high temperatures , K25 can be produced in FKM material.