K86

K86 - Static Seal
   KASTAŞ NO Dmin (H8) Dmax (H8) B(-0/+0.2) S n
 K86-060 60,00 62 6,20 2,70 4,70
 K86-063 63,00 65,50 8,40 4,00 6,60
 K86-070 70,00 72,80 8,40 4,00 6,60
 K86-072 72,00 75 8,20 4,00 6,60
 K86-080 80,00 83,20 8,40 4,00 6,60
 K86-090 90,00 93,60 8,20 4,00 6,60
 K86-090/1 90,00 93,60 8,40 4,00 6,60
 K86-092 92,00 95,60 8,20 4,00 6,60
 K86-100 100,00 104 8,40 4,00 6,60
 K86-102 102,00 106 8,20 4,00 6,60
 K86-105 105,00 109,40 8,20 4,00 6,60
 K86-110 110,00 114,40 8,40 4,00 6,60
 K86-112 112,00 116,50 8,20 4,00 6,60
 K86-115 115,00 120 8,40 4,00 6,60
 K86-120 120,00 124,80 8,40 4,00 6,60
 K86-125 125,00 130 8,40 4,00 6,60
 K86-127 127,00 132 8,20 4,00 6,60
 K86-130 130,00 135,20 8,40 4,00 6,60
 K86-137 137,00 142,40 8,20 4,00 6,60
 K86-140 140,00 145,60 9,30 4,65 6,60
 K86-154 154,00 160 8,20 4,00 6,60
 K86-160 160,00 166,40 9,30 4,65 6,60
 K86-165 165,00 172 8,20 4,00 6,60
 K86-175 175,00 182 8,20 4,00 6,60
 K86-180 180,00 187,20 9,30 4,65 6,60
 K86-186 186,00 193,50 8,20 4,00 6,60
 K86-188 188,00 195,50 8,20 4,00 6,60
 K86-194 194,00 200 8,20 4,00 6,60
 K86-195 195,00 201 8,20 4,00 6,60
 K86-198 198,00 204 8,20 4,00 6,60
 K86-200 200,00 208 9,30 4,65 6,60
 K86-216 216,00 225 8,20 4,00 6,60
 K86-220 220,00 228,80 9,30 4,65 6,60
 K86-222 222,00 230 9 4,40 6,60
 K86-230 230,00 240 9,30 4,65 6,60
 K86-230/1 230,00 240 11,20 5,60 7,50
 K86-232 232,00 240 9 4,90 7,50
 K86-242 242,00 250 11,20 5,60 7,50
 K86-250/1 250,00 260 9,30 4,65 6,60
 K86-258 258,00 268 11,20 5,60 7,50
 K86-260 260,00 270 9 4,40 6,60
 K86-270 270,00 280 11,20 5,60 7,50
 K86-270/1 270,00 280 9,30 4,65 6,60
 K86-300/1 300,00 310 11,80 5,80 7,50
 K86-300/2 300,00 310 9,30 4,65 6,60
 K86-320 320,00 332 11,20 5,60 7,50
 K86-323 323,00 333 11,80 5,80 7,50
 K86-335 335,00 345 11,80 5,80 7,50
 K86-353 353,00 363 11,80 5,80 7,50
 K86-375 375,00 385 11,20 5,60 7,50
 K86-405 405,00 415 11,80 5,80 7,50
 K86-410 410,00 420 11,80 5,80 7,50
 K86-425 425,00 435 11,80 5,80 7,50
 K86-450 450,00 460 11,80 5,80 7,50
 K86-465 465,00 475 11,80 5,80 7,50

K86 is a static sealing element designed to replace O-ring + back up ring combination.

PRODUCT ADVANTAGES
• High operating pressures
• Interchangeable for o-ring and o-ring with back-up ring
• Can work under severe conditions
• No need for additional back-up ring
• High wear resistant
• No twisting problem on assembly

APPLICATION
All the hydraulic applications that o-rings are being used.
MATERIAL CODE
PU 92 SHORE A PU9201
OPERATING CONDITIONS
MEDIA Mineral oils (DIN 51524)  HFA ve HFB HFC
TEMPERATURE -45°C +100°C +5°C +50°C -30°C +40°C
PRESSURE ≤500 Bar ≤500 Bar ≤500 Bar
Note: The above data are maximum values and cannot be used at the same time.

    

SURFACE ROUGHNESS Ra Rmax
Sliding Surface   ØD ≤0.8 µm ≤3.2 μm
Groove Base   Ød ≤1.6 µm ≤6.3 µm
Groove Flanks  B ≤6.3 µm ≤16 µm

INSTALLATION
Easily assembled by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES
K85 is a double acting cover seal for outer sealing. The diffculties faced during an o-ring assembly such as twisting , ripping was solved with this design.