K30

K30 - Pneumatic Combi Seal
   KASTAŞ NO d (f9) D1 (± 0,1) D2 (H10) b S1 (-0/+0,2) r c
 K30-010 10 19 17 8.4 7.5 1,1 1.5
 K30-012 12 24 22 9,5 8,5 1,1 1,5
 K30-012/1 12 20 22 8.5 7.5 1.1 1.5
 K30-014 14 26 24 9,5 8,5 1,1 1,5
 K30-016 16 28 26 9,5 8,5 1,1 1,5
 K30-018 18 28 26 8,5 7,5 1,1 1,5
 K30-020 20 32 30 9,5 8,5 1,1 2
 K30-022 22 34,5 32 9,5 8,5 1,4 2
 K30-025 25 37,5 35 9,5 8,5 1,4 2
 K30-030 30 42,5 40 9,5 8,5 1,4 2
 K30-032 32 44,5 42 9,5 8,5 1,4 2
 K30-035 35 47,5 45 9,5 8,5 1,4 2
 K30-040 40 52,5 50 9,5 8,5 1,4 2
 K30-045 45 57,5 55 9,5 8,5 1,4 2
 K30-050 50 63,2 60 9,5 8,5 1,8 2

K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Superior wiping effect
• Superior sealing effect
• Wide range of dimensions
• Able to work in hard conditions
• Good adjustment to temperature changes due to the metal ring

APPLICATION
Pneumatic cylinders.
MATERIAL   CODE
NBR 70 SHORE A NB7001
STEEL  ST37 FE9901
OPERATING CONDITIONS
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105°C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.

    

SURFACE ROUGHNESS
Rmax
Sliding Surface  Ød
≤4 μm
Groove Base ØD2
≤10 μm
Groove FlanksS1
≤15 μm

INSTALLATION
K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES
For special applications that require high temperatures , K30 can be produced in FKM material.